PERC單晶正銀漿料FSP- F828系列
- 產品型號
- 產品描述
描述
產品介紹(Description)
FSP- F828P 正面銀漿是我公司推出的一款高效率、高附著力 PERC 單晶硅太陽能電池正面漿料，可與 SA-6171D 系列背銀和 SA-6070A 系列鋁漿配套使用。該系列漿料可以同時實現在 30μm 及以上普通網版和 24μm 及以上無網結網版上的高效印刷，獲得較大的高寬比，確保更高的短路電流和填充因子。
FSP- F828P Front Paste is a new front side silver paste for multicrystalline silicon solar cells, which is characterized by high efficiency and strong adhesion.
It can be used together with SA-6070A Al paste for BSF(back surface field). This paste can achieve high aspect ratio and fine line printability on both 30 μm conventional width and 24μm width Mesh Cross Free screen, and contribute improved Isc and FF.
技術參數(Specifications)
|
產品型號(Type) |
F828P |
|
粘度(Viscosity)/Pa.s |
100-300 |
|
研磨細度(Fineness of grind)/μm |
≤10 |
|
固含量(Solid content) |
90±2% |
|
轉換效率(Efficiency) (η)（多晶） |
≥22.0% |
|
開路電壓(Open voltage) (Voc) |
≥680mV |
|
附著力（ N） |
≥2(0.75mm,180°) |
使用工藝(Process)
|
網版目數(Screen mesh)/μm： |
325/360/430 |
|
網版線徑(Wire diameter)/μm： |
13-16 |
|
網版開口(Mesh opening)/μm： 普通網版(Conventional screen)/μm： |
28-32 |
|
無網結網版(Knotless screen)/μm： |
24-28 |
|
乳劑厚度(Emulsion thickness)/μm： |
10-16 |
|
烘干溫度(Drying): 180℃-220℃/1-5min |
|
|
燒結工藝(Firing conditions)： |
|
|
溫度(Temperature)： 750-850℃ |
處理時間(Annealing time)： 1-5s |
升溫速度(Increasing speed)： 10-15℃/s 降溫速度(Cooling rate)： 8-15℃/s
儲存和存儲期（ Storage and Shelf Life）
密封避光狀態保存， 5-25℃， 六個月。 Stored in a clean, stable environment at ambient temperature(5-25℃). Shelf life of material in unopened containers is a minimum of six months.
